Product Reviews

Silkland DP80 DisplayPort Cable Review: A Short, High-Bandwidth Link for Gaming

A short DisplayPort cable for gamers building a high-bandwidth connection between a compatible graphics card and monitor.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland DP80 DisplayPort Cable review is most relevant to gamers who want a compact connection for a high refresh rate monitor and a graphics card with DisplayPort 2.1 support.

Its 1.6-foot length and stated 80Gbps bandwidth suit a close-together PC and display setup, while making cable reach an important consideration.

Silkland DP80 Cable Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers building a high-bandwidth connection between a compatible graphics card and monitor.

  • VESA-certified DisplayPort 2.1 cable with a stated data rate of 80Gbps and UHBR20 compatibility.
  • Supports uncompressed modes up to 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed limits include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
  • Includes VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D, and HDCP 2.3 support.
  • Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 channel formats.

Pros

  • High stated bandwidth and UHBR20 support give compatible systems room for demanding resolution and refresh rate combinations.
  • Gaming-oriented features include VRR, ALLM, FEC, and DSC 1.2a.

Consider before buying

  • The 1.6-foot length limits placement options, so measure the full cable route before ordering.
  • The highest listed display modes depend on support from both the graphics card and monitor; DSC is required for the specified higher combinations.
Read the full review summary

This DP80 cable brings together VESA certification, DisplayPort 2.1 UHBR20 support, and a short 1.6-foot run.

Its listed display modes include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, with higher resolution and refresh rate combinations possible up to the stated limits when DSC is enabled.

Those are capability ceilings, not guarantees: the graphics card, monitor, settings, and connection must support the mode you want.

The design is aimed at gaming and tidy desk setups where the PC sits near the monitor.

Features such as VRR, ALLM, FEC, MST, HDR10+, and audio pass-through make it a plausible fit for a capable gaming display, while backward compatibility may help with older DisplayPort equipment.

The very short length is the main practical constraint; measure the route and check both devices' DisplayPort version before choosing it.

The buying factors

Silkland DP80 Cable Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth headroom

The 80Gbps DP80 specification and UHBR20 compatibility offer substantial bandwidth for supported high-resolution, high-refresh modes.

9/10

High-refresh gaming fit

VRR, ALLM, FEC, and DSC 1.2a are relevant features for a gaming setup, though the devices determine which modes are available.

8/10

Compatibility range

Backward compatibility with DP 2.0 and 1.4 gives it a path to work with earlier DisplayPort equipment.

5/10

Desk setup flexibility

A 1.6-foot cable can keep a nearby connection compact but leaves little room for a distant tower or routing around furniture.

8/10

Build details

Tinned copper conductors, triple shielding, a nylon exterior, and latch-free connectors are practical design choices for everyday handling.

8/10

Setup simplicity

Male-to-male DisplayPort connectors and a no-latch design make the basic connection straightforward, subject to device port access.

Key Features and Specifications of Silkland DP80 Cable

  • VESA-certified DisplayPort 2.1 cable with a stated data rate of 80Gbps and UHBR20 compatibility.
  • Supports uncompressed modes up to 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed limits include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
  • Includes VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D, and HDCP 2.3 support.
  • Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 channel formats.
  • Male-to-male DisplayPort connectors have no latch; the cable uses 24K gold-plated connectors, 28AWG tinned copper conductors, triple shielding, and a nylon exterior.
  • At 1.6 feet, it is intended for indoor connections between DisplayPort-equipped computers and monitors.

Pros and Cons of Silkland DP80 Cable

Pros

  • High stated bandwidth and UHBR20 support give compatible systems room for demanding resolution and refresh rate combinations.
  • Gaming-oriented features include VRR, ALLM, FEC, and DSC 1.2a.
  • Short length can help keep a nearby PC-to-monitor connection compact.
  • Backward compatibility may make it useful with compatible DP 2.0 or 1.4 equipment.
  • Nylon exterior, triple shielding, and latch-free connectors address handling and connection convenience.

Consider before buying

  • The 1.6-foot length limits placement options, so measure the full cable route before ordering.
  • The highest listed display modes depend on support from both the graphics card and monitor; DSC is required for the specified higher combinations.
  • A latch-free plug may be easier to disconnect, but buyers who prefer a locking connection should consider how the cable will be routed and handled.

Who Should Buy Silkland DP80 Cable?

Good fit

Consider the Silkland DP80 Cable if your graphics card and monitor both have DisplayPort and you want a short connection with substantial bandwidth headroom.

It is especially relevant when your target resolution and refresh rate are supported across the entire setup, rather than relying on the cable specification alone.

Its gaming feature set and compact length also make sense for a desktop where the tower sits close to the display.

Before buying, confirm the ports, desired mode, and cable path; for higher modes listed with DSC, check that both devices support the required configuration.

Who should skip it

Skip this length if the tower is under a desk, far from the monitor, or the cable must follow a long route. A longer cable in the same general category may suit that layout better.

Look elsewhere if your setup lacks DisplayPort ports or if you need a cable long enough to route behind furniture. This model's short reach is a central part of its design.

What the Silkland DP80 Cable means for a gaming setup

Bandwidth depends on the whole signal path

The 80Gbps DP80 rating and UHBR20 support are aimed at high-bandwidth DisplayPort connections. The listed uncompressed modes reach 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz.

Higher combinations are listed with DSC enabled, so check that your graphics card and monitor support the intended resolution, refresh rate, and compression mode.

Gaming features are useful only when devices support them

VRR, ALLM, FEC, and DSC 1.2a align with a gaming-focused setup, while MST is relevant to multi-monitor configurations.

These features describe the cable's supported technologies; they do not by themselves establish that a particular game, monitor, or graphics card will operate at a given mode. Verify device support and configuration before choosing around a specific target.

The short run favors a nearby monitor

At 1.6 feet, the cable is best suited to a PC positioned close to its display. That can reduce excess cable on a compact desk, but the length leaves little slack for repositioning or indirect routing.

Measure from port to port along the path the cable will actually follow, not just the straight-line distance.

Construction choices suit regular connection handling

The cable combines 28AWG tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior. The no-latch connector design avoids a release mechanism when unplugging; check that your device ports are accessible enough to connect and disconnect comfortably.

Alternatives to Silkland DP80 Cable

Computer DisplayPort Cables alternative

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft

Choose the DP80 when a short run and its higher stated bandwidth fit your setup.

The 10-foot model is a more practical fit when the display is farther away or needs extra routing slack, with a lower stated bandwidth ceiling.

  • This 10-foot Silkland cable specifies 54Gbps bandwidth, supports up to 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz, and is backward compatible with DisplayPort versions 2.0 through 1.0.
  • The Silkland DP80 Cable is 1.6 feet long and specifies 80Gbps bandwidth with UHBR20 support, making it a compact option for a nearby display.

Is Silkland DP80 Cable Worth It?

The Silkland DP80 DisplayPort Cable is worth considering for a gaming setup that needs a short, high-bandwidth DisplayPort connection.

Its 80Gbps specification, gaming-oriented feature set, and compact 1.6-foot length are compelling when the PC and monitor sit close together.

Treat the display modes as dependent on the connected devices and settings, and confirm support for DSC where needed.

If your cable route is longer than 1.6 feet, choose a longer option; otherwise, this is a focused cable for a compatible nearby display.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers building a high-bandwidth connection between a compatible graphics card and monitor.

  • VESA-certified DisplayPort 2.1 cable with a stated data rate of 80Gbps and UHBR20 compatibility.
  • Supports uncompressed modes up to 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed limits include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
  • Includes VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D, and HDCP 2.3 support.
  • Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed audio pass-through in 7.1, 5.1, and 2.0 channel formats.

Written by

granvilleislandworks.com Editorial Team

Editorial team

granvilleislandworks.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers building a high-bandwidth connection between a compatible graphics card and monitor.

  • VESA-certified DisplayPort 2.1 cable with a stated data rate of 80Gbps and UHBR20 compatibility.
  • Supports uncompressed modes up to 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed limits include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
Check Video Reviews on Amazon