The SmallRig Cold Shoe Mount 2060 is a compact way to add accessory attachment points to compatible camera rigs.
This SmallRig Cold Shoe Mount review looks at its two-piece design, mounting hardware, and fit limitations for creators building around cages, handles, and plates.
SmallRig Shoe Mount Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-pack for camera builders who need fixed cold-shoe points on compatible cages, handles, or plates.
- Two cold shoe mounts are included, each measuring 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction keeps the mount compact for cage, handle, or plate setups.
- A 1/4-inch-20 screw is included for attachment to compatible threaded holes.
- The package also includes four M2.5 screws and two hex spanners for supported mounting arrangements.
Pros
- Two mounts make it possible to add more than one accessory point or keep a spare.
- The small 25 mm square footprint suits compact cage and handle builds.
Consider before buying
- It provides a fixed mounting point, so it does not offer the angle adjustment of a ball-head mount.
- Compatibility depends on the specific cage and threaded-hole arrangement; SmallRig Full Cage 1661 has a special installation note.
Read the full review summary
The 2060 is a simple mounting accessory: each aluminum alloy shoe measures 25 × 25 mm and attaches through a 1/4-inch-20 threaded hole using the included screw.
Two M2.5 screws and a hex spanner are also supplied for setups that use those fasteners. The pair gives a rig builder two mounts to place where they are useful, rather than requiring a more elaborate adjustable arm.
It is suited to adding a microphone, flash, or LED to compatible camera accessories, provided the accessory has the required threaded mounting point.
The design emphasizes a fixed attachment position and includes bevels intended to help prevent accidental removal, plus arrows indicating mounting direction.
Check the cage’s mounting arrangement before buying: the product notes a specific exception for SmallRig Full Cage 1661 and says it is not suitable for DJI or ZHIYUN gimbals.
The buying factors
SmallRig Shoe Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rig compatibility
The 1/4-inch-20 mount and included M2.5 hardware cover several threaded accessory setups, but compatibility depends on the exact cage or rig.
Mounting simplicity
The mount uses included screws and a hex spanner, with arrows to clarify its mounting direction.
Accessory versatility
It is designed to hold a microphone, flash, or LED on compatible camera accessories.
Retention design
Bending bevels at one end are intended to help prevent accidental removal.
Pack value
Two mounts, multiple screws, and two spanners give buyers useful hardware for more than one mounting point.
Positioning flexibility
This is a fixed shoe mount, so choose it when placement can be set by the threaded hole rather than adjusted with a joint.
Key Features and Specifications of SmallRig Shoe Mount
- Two cold shoe mounts are included, each measuring 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction keeps the mount compact for cage, handle, or plate setups.
- A 1/4-inch-20 screw is included for attachment to compatible threaded holes.
- The package also includes four M2.5 screws and two hex spanners for supported mounting arrangements.
- Two bending bevels at one end are designed to help prevent accidental removal, while two white arrows indicate mounting direction.
- Intended for attaching a microphone, flash, or LED to compatible camera accessories; the product notes it is not suitable for DJI or ZHIYUN gimbals.
Pros and Cons of SmallRig Shoe Mount
Pros
- Two mounts make it possible to add more than one accessory point or keep a spare.
- The small 25 mm square footprint suits compact cage and handle builds.
- Includes both 1/4-inch-20 and M2.5 mounting hardware, plus spanners.
- The shoe design is intended for common rig accessories such as microphones, flashes, and LED lights.
Consider before buying
- It provides a fixed mounting point, so it does not offer the angle adjustment of a ball-head mount.
- Compatibility depends on the specific cage and threaded-hole arrangement; SmallRig Full Cage 1661 has a special installation note.
- The product specifically rules out DJI and ZHIYUN gimbals, limiting its fit for some stabilized setups.
Who Should Buy SmallRig Shoe Mount?
Good fit
Consider the 2060 if you are assembling a camera cage, handle, or plate rig and want a straightforward cold shoe for a microphone, flash, or LED.
Its two-mount pack is useful when you have more than one accessory to place, or when you want a second mount available for another build.
Before choosing it, inspect the rig’s mounting points and confirm which fastener applies.
The product describes 1/4-inch-20 threaded holes as the usual attachment and says the included M2.5 screws are unnecessary for most cages, with an exception for SmallRig Full Cage 1661.
That makes a quick fit check worthwhile, especially when mixing components.
Who should skip it
Skip this mount if the planned installation is on a DJI or ZHIYUN gimbal, since the product notes it is unsuitable for those systems.
Choose an adjustable mounting design if you need to change an accessory’s angle after installation; the 2060 is a fixed cold shoe rather than an articulated support.
How the SmallRig Shoe Mount Fits a Camera Rig
A straightforward way to add accessory points
The mount’s purpose is narrow and practical: provide a cold shoe on a compatible threaded accessory surface. That suits a cage, handle, or plate when the chosen location already places the accessory where it needs to sit.
The included pair is especially relevant for builders planning separate points for items such as a microphone and a light.
Check the fastener before mounting
The package includes 1/4-inch-20 screws and M2.5 screws, but the installation depends on the rig.
The product describes the 1/4-inch-20 screw as the usual way to secure the mount to a cage, plate, or handle, and notes that the M2.5 fastener is unnecessary on most cages apart from the SmallRig Full Cage 1661 case.
Confirm the threaded hole and installation instructions for the exact accessory before tightening anything.
Fixed positioning favors a clean build
Because the mount is a direct shoe attachment, its value is in adding a defined accessory location without an articulated arm.
The bevels and directional arrows provide useful design cues during installation, though they do not replace checking that the shoe is seated correctly.
If you need to reposition or tilt an accessory, a jointed mount is a better fit for that workflow.
Mind the system boundary
This mount is aimed at camera accessories with compatible threaded holes; the product explicitly excludes DJI and ZHIYUN gimbals. That limitation matters when a rig combines cage parts with stabilization gear.
Treat the product as a cage-and-accessory component and verify the exact connection point before building around it.
Alternatives to SmallRig Shoe Mount
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter with Shoe Mount 1135
Choose the 2060 when you want fixed shoe points and have compatible threaded mounting locations. The 1135 is more suitable when angle adjustment is a priority and the supported accessory stays within its stated weight guidance.
- The 1135 uses a double ball head that rotates up to 180 degrees and locks with a side wingnut.
- It includes a shoe base and a 1/4-inch screw, and is not recommended for monitors or LED lights over 1 kg.
- The 2060 is a fixed cold shoe mount supplied as a two-piece pack, with screws for compatible threaded holes.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Cold Shoe Mount Adapter 3577
Pick the 2060 for a two-mount setup with fixed positions on compatible threaded rig points.
The 3577 better fits a buyer who wants tilt adjustment in a compact mount and whose accessory falls within its 250 g support limit.
- The 3577 is a mini ball-head mount that tilts up to 138 degrees, weighs 20 g, and supports devices up to 250 g.
- It has a 1/4-inch screw on top and a cold shoe adapter at the base.
- The 2060 focuses on fixed mounting and provides two shoe mounts with several screw options.
Is SmallRig Shoe Mount Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering for a compact camera-rig build that needs one or two fixed accessory points.
Its two-piece pack, aluminum alloy construction, and included screw hardware make it a practical option for compatible cages, handles, and plates.
Buy only after checking the mounting arrangement and respecting the stated gimbal exclusions.
If your priority is tilt or angle adjustment, select a ball-head design; if a fixed shoe at a known location is all you need, the 2060 keeps the setup simple.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-pack for camera builders who need fixed cold-shoe points on compatible cages, handles, or plates.
- Two cold shoe mounts are included, each measuring 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction keeps the mount compact for cage, handle, or plate setups.
- A 1/4-inch-20 screw is included for attachment to compatible threaded holes.
- The package also includes four M2.5 screws and two hex spanners for supported mounting arrangements.